KEYSTONE RIDERS
http://www.keystoneriders.com/forum/

Powdercoating
http://www.keystoneriders.com/forum/viewtopic.php?f=7&t=1177
Page 1 of 1

Author:  Eskimo [ Mon Apr 25, 2016 8:12 am ]
Post subject:  Powdercoating

Putting this here for historicals:

Mentch171, as well as a few other very picky friends of mine have had powdercoating work done by a shop in Sunbury:

Custom Metal Coatings
301 Court Street
Sunbury, PA 17801

570-988-2226

If you've seen Mentch's stuff, then that's all the endorsement you need. :) I dropped off a second pair of wheels for the racebike to get done to match, but I'm sure it'll come out great. There were a few sets of car wheels there when I stopped in, and they looked really good.

Image

Author:  Mentch171 [ Mon Apr 25, 2016 4:44 pm ]
Post subject:  Powdercoating

I've been going to them a long time. They do great work and can do damn near anything you can imagine. Check out their Facebook page. He posted they just did a dragster frame that measured over 22' long.

And thank you Eskimo

Sent from my iPhone using Tapatalk

Author:  Eskimo [ Tue Apr 26, 2016 9:00 am ]
Post subject:  Re: Powdercoating

This is also to remind me, I have to get down there this week with a body panel from the R6 to match up - apparently a Pantone code or paint code isn't how powdercoating works, so to get the best match I need to bring something in.

Author:  dapucker1 [ Tue Apr 26, 2016 3:19 pm ]
Post subject:  Re: Powdercoating

I will second this. I have personally used CMC (sad that the father has passed away) for multiple items that were VERY sensitive, and always been happy. For example, satin metalic grey finish on the centers of the last set of BBS LM's I built:
Image

The company I am working for uses them to the extent that we have a van specifically for hauling finished goods back and forth... Have yet to see unsatisfactory work.

Author:  Eskimo [ Tue Apr 26, 2016 3:29 pm ]
Post subject:  Re: Powdercoating

dapucker1 wrote:
The company I am working for uses them to the extent that we have a van specifically for hauling finished goods back and forth... Have yet to see unsatisfactory work.


Damn, maybe I should have dropped THAT name instead of Jarrod's! :lol:

Author:  Mentch171 [ Tue Apr 26, 2016 5:31 pm ]
Post subject:  Re: Powdercoating

dapucker1 wrote:
I will second this. I have personally used CMC (sad that the father has passed away) for multiple items that were VERY sensitive, and always been happy. For example, satin metalic grey finish on the centers of the last set of BBS LM's I built:
Image

The company I am working for uses them to the extent that we have a van specifically for hauling finished goods back and forth... Have yet to see unsatisfactory work.


Damn they're some nice looking wheels!

On a funny side note, we have a guy who we've known for a long time working with us now in his second week who used to work at your company. He left there and worked in the construction field pretty much for the last 10 years. He recently decided to leave the company where he's been working and approached us. We're really happy to have him aboard :woot:

Author:  Mentch171 [ Tue Apr 26, 2016 5:34 pm ]
Post subject:  Re: Powdercoating

Eskimo wrote:
dapucker1 wrote:
The company I am working for uses them to the extent that we have a van specifically for hauling finished goods back and forth... Have yet to see unsatisfactory work.


Damn, maybe I should have dropped THAT name instead of Jarrod's! :lol:


Hey now my name is always good to drop :roll: well most of the time anyway.

Author:  Eskimo [ Tue Apr 26, 2016 8:33 pm ]
Post subject:  Re: Powdercoating

Mentch171 wrote:
Eskimo wrote:
dapucker1 wrote:
The company I am working for uses them to the extent that we have a van specifically for hauling finished goods back and forth... Have yet to see unsatisfactory work.


Damn, maybe I should have dropped THAT name instead of Jarrod's! :lol:


Hey now my name is always good to drop :roll: well most of the time anyway.


It was.. He nodded vertically, not horizontally. :)

Author:  Eskimo [ Thu May 19, 2016 10:48 am ]
Post subject:  Re: Powdercoating

Wheels came out great, perfectly masked off the bolt areas and where the rotors sit, etc.

Just have to get the new bearings in them.

The color looks all wrong (too light) in the garage light, but should match the color in the sunlight.

Image

Sent from my Samsung S7 while driving, eating, and texting..

Author:  dapucker1 [ Thu May 19, 2016 12:38 pm ]
Post subject:  Re: Powdercoating

What's funny is I was there last friday and saw them sitting there and thought "Cool". If only you littered them with cheetos print.... :P

Author:  Eskimo [ Thu May 19, 2016 1:51 pm ]
Post subject:  Re: Powdercoating

dapucker1 wrote:
What's funny is I was there last friday and saw them sitting there and thought "Cool". If only you littered them with cheetos print.... :P


Thanks for picking them up for me, PAL. :jerkoff:









:rich:

Author:  61Cubes [ Thu May 19, 2016 1:55 pm ]
Post subject:  Re: Powdercoating

They'rrrrrrrre Great!

Author:  dapucker1 [ Thu May 19, 2016 2:38 pm ]
Post subject:  Re: Powdercoating

Eskimo wrote:
Thanks for picking them up for me


lol didn't even occur to me that they were yours... I honestly assumed they belonged to some squid.

Author:  Eskimo [ Thu May 19, 2016 2:59 pm ]
Post subject:  Re: Powdercoating

dapucker1 wrote:
Eskimo wrote:
Thanks for picking them up for me


lol didn't even occur to me that they were yours... I honestly assumed they belonged to some squid.


Your assumption was correct!

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/